Psa Diagbox Serial

Click Here https://urllio.com/2sUzUc

this is the instruction to reflash your lexia interface:(1) install the [ PSA Interface Checker Install.exe ] , after installation you will get 3 new shortcuts on desktop(2) connect your lexia interface to your computer by USB cable , no need to connect to car, install the driver for the interface automatically(3) run the [ PSA Interface Checker ] from desktop, click ACTIVATE,(4) click Version of the selected file (APPLI.com), select vci_updater.com file, click Download the Flash App, wait for a few seconds untill the flash is done (when the flash is done successfully, the greem light/LED on your lexia interface will keep flashing )*** This step is for reflashing which will change the serial number of your lexia interface from Revision B to Revision C also with the original Evolution Driver !*** If the reflashing procedure only takes 1 second in your side , usually that means the

As electronics and have already developed on the MCU used in this interface (MB90F546), I developed a special program which is injected into the interface through USB with PSA Interface Checker and allows the upgrade for it to be recognized usb com Evolution board and also change the serial number for a No. non blacklisted series. The interface then becomes compatible with the latest versions of diagbox 8)

This is much better than no single series for everyone, even if existing, for if one day the manufacturer decides to blacklist the serial number, then all these interfaces are found inconsistent with the future versions diagbox !!

And at worst, if one day the serial number that I provided you can no longer work correctly with future versions of diagbox, and although it will be enough to remake me a request and I will provide a new update file to change by the usb serial number in eeprom, always without removing the interface 2b1af7f3a8